Public Program: Industrial Engineering.OSHA

 

Confined Work Safety-EIG800

OBJECTIVE
• To provide participants with an understanding of the dangers working in confined space. The need to have safety procedures and the requirement stated in the Occupational Safety and Health Act 514.

COURSE CONTENT
• Introduction
• Safety and Health Act 514
• What is Confined Space
• Understanding Hazardous Gas and Vapour in confined space
• Requirement of entry to confined space
• Procedure of using apparatus
• Priorities to health
• Permit to work system
• Gas detector apparatus
• Responsibilities of confined space worker
• Practical
• Discussion
• Course Evaluation and Closing

WHO SHOULD ATTEND
• Safety Officer, Safety and Health Committee members

Pre-Requisites
• Participants attending the course must be in a good state of health and are expected to participate in all physical training requirements.

Duration : 2 days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, practical demonstration.


 

Program Persijilan-Pegawai Keselamatan & Kesihatan-EIG1300

Objektif
• Mendapat pendedahan dalam mengaplikasikan prinsip-prinsip keselamatan dan kesihatan pekerjaan di tempat kerja.
• Terlatih untuk melaksanakan aktiviti KKP mengikut keperluan AKKP dan Peraturannya
• Bersedia untuk menduduki peperiksaan Pegawai Keselamatan & Kesihatan dengan tujuan untuk dilantik sebagai Pegawai Keselamatan & Kesihatan.

TOPIK-TOPIK
MODUL 1
• Pengenalan
• Prinsip-prinsip Pencegahan Kerugian
• Penyusunan & Organisasi dan Polisi Keselamatan dan Kesihatan
• Penilaian dan Kawalan Risiko
• Persediaan Semasa Kecemasan dan Penyiasatan Insiden/kemalangan
• Pertolongan Cemas di tempat kerja
• Pemantauan dan Pengukuran Prestasi KKP

MODUL II
• Pengurusan Keselamatan dan Kesihatan Pekerjaan
• Aspek Perundangan Keselamatan dan Kesihatan Pekerjaan
• Bidang kuasa Undang-undang
• Akta Keselamatan dan Kesihatan Pekerjaan 1994
• Penubuhan Jawatankuasa Keselamatan dan Kesihatan dan kepentingannya
• Pemantauan dan Pengukuran Prestasi
• Akta Kilang dan jentera 1967 (termasuk 17 peraturan yang berkaitan)
• Pengenalan kepada Perundangan dan kod-kod amalan yang berkaitan.
• Sumber-sumber maklumat mengenai akta-akta lain di Malaysia dan peraturan-peraturan antarabangsa.

MODUL III
Kesihatan Pekerjaan
• Pengenalan
• Prinsip-prinsip utama psikologi
• Piawaian Kesihatan Pekerjaan
• Penyakit dan masalah yang berkaitan dengan kesihatan pekerjaan
• Pengurusan Bahaya-bahaya kimia
• Topik bahaya khusus Asbestos, Plumbum, Debu Galian & Racun Serangga
• Sinaran mengion dan tak mengion
• Penyakit Kulit pekerjaan
• Ergonomik
• Program Perlindungan Pendengaran & kebisingan
• Ketegangan (Stress) pada haba yang tinggi
• Kualiti udara dalaman dan peredarannya
• Bahaya ruang tertutup
• Perlindungan pernafasan & pakaian perlindungan bahan kimia
• Promosi kesihatan dan gaya hidup sihat

MODUL IV
• Keselamatan Pekerjaan
• Bahaya jentera mesin
• Penghadang keselamatan bagi jentera mesin
• Pengendalian jentera mesin secara selamat (termasuk pemanduan behemah)
• Pemeliharaan jentera penghadang dan alatan
• Memagar kawasan umum
• Penjagaan kebersihan dan pengurusan fizikal
• Keselamatan & Pengendalian Alatan yang berkenaan
• Pengendalian Bahan
• Alat Keselamatan dan Pengendalian mesin mudah alih secara selamat
• Keselamatan di tapak binaan
• Keselamatan ala-alat mudah alih dan berkuasa
• Keselamatan elektrik
• Keselamatan di pejabat
• Alat perlindungan peribadi

Jangkamasa : 26 hari
Masa : 9.00 am – 5.00 pm.
Tempat : JOHOR SKILLS
Kaedah Mengajar : Penyampaian pembelajaran secara teori, praktikal serta perbincangan


 

Emergency Response Plan-EIG1200

OBJECTIVE
• Upon the completion of the course, participants will be able to:
• Identify factors that can cause emergencies
• Plan and respond to any emergencies effectively
• Write a documentation for ERP

COURSE CONTENTS
INTRODUCTION TO EMERGENCY RESPONSE
• Definition
• Types of emergency
PLANNING FOR EMERGENCY
• Plant layout
• Assembly point
• Control centre
• Communication
• First aid treatment
JOBS AND RESPONSIBILITIES
• Emergency response team
• On-scene commander
• Emergency controller
• Operation controller
FIRE DRILL
POST EMERGENCY ACTION
• Medical treatment
• Investigation
• Report
FIRE
• Fire triangle
• Types of fire
• Chemicals of fire
• Fire prevention program
FIRE EXTINGUISHER
• Types of fire extinguisher
• Fire fighting system
• How to fight fire
• Maintenance and inspection
CASE STUDY AND EXERCISE
• How to write an ERP manual
• How to plan for actual emergency.

Who Should Attend
• Safety executives, safety officers, production staffs and all personnel in charge of safety and health at the workplace

Duration : 2 days
Time : 9.00am – 5.00pm
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, practical demonstration


 

Fire Induction-EIG1100

Objective

• To provide the participants with a greater awareness and understanding of the threat posed by fire, their personal responsibility in preventing of the outbreak and the action to be taken should a fire occur.

Course Contents
• Behavior of fire
• Alarm system
• Heat detection
• Smoke detection
• Sprinkler system
• Fire extinguishing aid
• Hydrant and hose reel
• Fighting incipient fire

Practical demonstration and the use of the following:
• Dry Chemical
• Carbon Dioxide
• Hose Reel

Who Should Attend
• Safety committee and employees targeted to be trained on the skills of responding to incipient fires.

Duration : 2 days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, video presentation, practical demonstration.


 

Basic Fire Fighting Squad-EIG1000

Objective
• At the end of this programme trainees will understand the effectiveness of difference types of fire fighting equipment and the techniques applicable to their area of responsibility.

Course Contents
• Behavior of fire
• Alarm system
• Heat detection
• Smoke detection
• Fire stream
• Ventilation
• Building construction
• Fire control
• Sprinklers Application and System
• Fire extinguishers application and Function
• Firefighter safety
• Firefighter protective
• Group discussion closing
• Hose appliances and tools
• Practical exercise on the use of difference types of fire fighting aid:
• Portable fire extinguisher
• Hydrant
• Hose lines
• Foams
• Hose reel
• Fire control practical exercise
• Group discussion and evaluation

Pre-Requisites
• Trainees should be in good health and are expected to participate in all physical training requirements.

Who Should Attend
• Safety Committee, fire fighting squad and those responsible in safety.

Skills Exposure
• The participant will gain the basic knowledge and application of fire fighter equipment and system.

Duration : 2 Days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, practical demonstration.


 

Safety Audit-EIG900

Objective
• By the end of this training course, the participants should be able to :

Course Contents
• Plan and manage audits
• Arranging an audit
• Carrying out audits
• Write a report
• Course Contents
Day 1
• Rules and requirement of the OSHA 1994
• Overview of Auditing
• Hazard Identification, Risk Assessment and Control
• Understanding of Management System
• Documentation and management Safety Data Sheets
• (MSD)
• Safety Audits, Methodology and Techniques of data
• Collection
• Safety Auditing System
• Planning the Checklist
• Analyze benefit, effects and cost
• Audit Protocol Development
• Auditing to Standards
• Activities Standard
• The Auditing Programme
Day 2

• The Auditing Process
• Part I : Pre-Review Activities
• Part II : On Site Activities
• Part III : Post Review Activities
• Part IV : Status Reporting
• Internal Audit Procedures
• Course Evaluation & Closing

Who Should Attend
• Safety Officer, Safety and Health Committee members

Pre-Requisites
• Participants attending the course must be in a good state of health and are expected to participate in all physical training requirements.

Duration : 2 days
Time : 9.00 AM – 5.00 PM
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, practical demonstration.


 

Authorised Gas Tester-EIG700

Objective
• To expose participants to carry out the gas test for entry into confined space area and be able to identify the potential hazards and precautions to be observed

Course Contents
• Introduction to Safety and Health Act 51, and what is Confined Space
• Classification of Gas Tester
• Characteristic of Testing Areas
• Identification of confined space risks
• Understanding of inflammable gas
• Identify inflammable gas
• Identify toxic gas
• Tester apparatus
• Work permit
• Air ventilation
• Practical
• Discussion
• Examination.

Who Should Attend
• Safety Officer, Safety and Health Committee members

Pre-Requisites
• Participants attending the course must be in a good state of health and are expected to participate in all physical training requirements.

Duration : 2 days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, practical demonstration.


 

Safe Handling of Forklift-EIG600

Objective
• Participants will be able to understand:-
• Major and minor injuries related to material handling accidents
• Correct Management set up to material hazards
• Existing layout of operation and identify the hazards
• Parts of the forklift inspection and its procedure
• Numerous safe driving skill and correct handling techniques

Course Content
• General Safety Awareness
• Material Handling & Storage
• Forklift Inspections
• practical

Who Should Attend
• All Warehouse and Store Personnels, Shipping Personnels, Forklift Drivers, Material Handlers and supervisors

Duration : 2 days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : A participative and interactive approach using group discussion, role presentation, live video, slide, cassette tape and lectures.


 

Industrial Ergonomics-EIG500

Objective
• To enable participant to understand the proper techniques and approach of ergonomics is solving problem and issues arising from work and working environment based on Bio Engineering / Bio Mechanical or Man Machine Engineering.

Course Content
• Bio Mechanical and Bio Engineering
• Workplace design
• Work physiology
• Work / rest cycled
• Fatigues
• Human static strength
• Control system
• Human factors behavior
• Ergonomics checklist
• Case study and practical video presentation
• Industrial Psychology

Who Should Attend
• Workshop Superintendent, Safety Professionals, Safety Managers, Industrial Ergonomics, Industrial Nurses, Maintenance Engineering and Production Managers.

Duration : 2 days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, practical demonstration


 

Industrial Safety And Health Environment-EIG400

Objective
• To provide basic knowledge on industrial Safety Regulation and application of safety rules in compliance witch the OSH Act 1994,
• To enlighten participants on the importance of safety management in industries.

Course Content
• Introduction to Safety Management
• Safety Organization and the Responsibilities as per OSH Act, Malaysia 1994
• Responsibilities of Safety Officer / Safety Committee / Dept. Manager / Dept. Supervisor
• A guide to Safety and Health in the Mechanical, Electrical and Chemical Industries and its Preventive Measures
• Environmental Hazard and Risks Relating to DEO Requirements and Compliance
• Safety in Radiation (Infrared, Ultraviolet / Non-lonization and lonization)
• Health Hazards and Health Risks on Environmental Deficiencies at Workplace Including Gases, Vapour, Air and Aerosols
• Basic Toxicology ( Metal and Non-Metal )
• Industrial Noise & Acoustic include Hearing Loss-Abatement Programmes
• Case study on Industrial Safety hygiene and Environment

Who Should Attend
• Engineers, Technicians, Supervisor and all those involved in operation and maintenance of building, factories, chemical and petrochemical.

Duration : 2 days
Time : 8.30am – 5.30pm
Venue : JOHOR SKILLS
Methodology : Lecture, hands-on, open discussions, practical demonstration


 

Supervisory Management-EIG300

Objective
• At the end of the course, participants should be able to understand and appreciated the vital aspects of tools on supervisor management.

Course Content
Modul I
• Organization
• Organization and the supervisors
• Supervisor in Organization
• Manufacturing Organization
• Plants and Organization
Modul II
• Functions and Roles of Supervisors
• Supervisors and the management process
• Motivation
• Motivating the subordinates
• Conflict and the Team Building
• Case study and its application to industries
Modul III
• Fundamentals of Time Measurement Method
• Job assessment and work schedules
• Theory and application of GANTT Charts
• Theory and application of PERT Charts
• Case study and its application in industries

Who Should Attend
• Technicians, Supervisors, Technical Assistant, Assistant Engineers and plant Superintendent.

Duration : 2 days
Time : 9.00 am – 5.00pm
Venue : JOHOR SKILLS
Methodology : Technicians, Supervisors, Technical Assistant, Assistant Engineers and Plant Superintendent.


 

Basic First Aid-EIG200

Objective
• To enable participant to appreciate and create awareness on the importance and necessity of Industrial Aid and Emergency care

Course Content
Day One
Registration
• Basic principles of First Aid
• Shock/Electrical Shock
• Bleeding and Blood Circulation
• Bandaging
Day Two
• Laceration wounds, Burns and Scalding
• Fractures, Dislocation, Sprains and Strains
• Drowning
• Poisoning
Day Three
• Minor Injuries
• Cardio-Pulmonary Resuscitation and Video Show
• Practical Sessions Continues
• Revisions
• Examination On First Aid

Who Should Attend
• Safety Officer, Safety Professionals, Plant Supervisors, Senior Technicians, Engineering Assistants and Individuals involved in related field.

Duration : 3 days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : Lecture, hand-on, open discussions, video presentation, practical demonstration


 

Occupational Safety And Health Officer-EIG100

OBJECTIVE
This certification courses is designed to meet the following objective:
• To educate candidates in all matters pertaining to occupational safety and health concept and principles
• To train candidates so that he/she is able to perform OSH activities and programmers to meet the requirement of OSH Act and its regulation ; and
• To assess his/her competency to undertake the responsibility of a safety and health officer.

COURSE CONTENT
Module I
• Occupational Safety And Health Management
• Principles of loss prevention
• OSH policy, organization, arrangements and documentation
• Risk assessment and control
• Emergency prepared or accident investigation
• First-aid at work
• OSH promotion and communication
• Performance measurement and monitoring
Module II
• Occupational Health
• Common law duties
• Occupational Safety Safety and Health Act 1994
• Setting up and importance of safety and health committee
• Sources of information on other international Acts and regulation on health its
• other 17 regulations
• Introduction to other related and codes of practices
Module III
• Occupational Safety And Health Legislation
• Occupational health overview-health surveillance, medical confidentiality,
• occupational health services and rehabilitation
• Fundamental of toxicology
• Occupational health standards
• Occupational diseases and health related problem
• Occupational health monitoring and surveillance
• Chemical hazard management
• Specific hazard topic-asbestos, lead, mineral dust and pesticides
• Ergonomics
• Noise and hearing conservation programmer
• Heat stress
• Ventilation and indoor air quality
• Confined space hazardsR
• Respiratory protection and chemical protective clothing
• General health promotion and healthy lifestyle
Module IV
• Occupational Safety
• Machinery hazards
• Safe guardians of machinery
• Safe machine operation (including defensive driving)
• Maintenance of machine, guards and tools
• General area fencing
• Housekeeping and physical management
• Safety devices and operation of pressurized equipment
• Material handling
• Safety devices and safe operation of hoisting machinery
• Construction safety
• Electrical safety
• Safety on hand tools and portable power tools
• Personal protective equipment ( for safety)

WHO SHOULD ATTEND
• Executives, Supervisors, Safety Technicians, Safety Committe member and those qualified individual interested to pursuer the related career.

Duration : 3 days
Time : 9.00 am – 5.00 pm
Venue : JOHOR SKILLS
Methodology : Occupational Safety & Health officer

Members Of FMSDC

Server Clock

Traffic Stats

Pages

Pages|Hits |Unique

  • Last 24 hours: 900
  • Last 7 days: 6,843
  • Last 30 days: 27,306
  • Online now: 6